Effect of wave nonlinearity on fatigue damage and extreme responses of a semi-submersible floating wind turbine     

《Applied Ocean Research》2019

Floating wind turbine has been the highlight in offshore wind industry lately. There has been great effort on developing highly sophisticated numerical model to better understand its hydrodynamic behaviour. A engineering-practical method to study the nonlinear wave effects on floating wind turbine has been recently developed. Based on the method established, the focus of this paper is to quantify the wave nonlinearity effect due to nonlinear wave kinematics by comparing the structural responses of floating wind turbine when exposed to irregular linear Airy wave and fully nonlinear wave. Critical responses and fatigue damage are studied in operational conditions and short-term extreme values are predicted in extreme conditions respectively. In the operational condition, wind effects are dominating the mean value and standard deviation of most responses except floater heave motion. The fatigue damage at the tower base is dominated by wind effects. The fatigue damage for the mooring line is more influenced by wind effects for conditions with small wave and wave effects for conditions with large wave. The wave nonlinearity effect becomes significant for surge and mooring line tension for large waves while floater heave, pitch motion, tower base bending moment and pontoon axial force are less sensitive to the nonlinear wave effect. In the extreme condition, linear wave theory underestimates wave elevation, floater surge motion and mooring line tension compared with fully nonlinear wave theory while quite close results are predicted for other responses.  相似文献   

THE ACTIVITY OF WESTERN LISHAN FAULT SINCE THE LATE PLEISTOCENE          下载免费PDF全文

XU Liang-xin  BIAN Ju-mei  HU Nan  TIAN Qin-hu  TIAN Wei-xin  DUAN Rui 《地震地质》2019,41(3):561-575

Along the northern piedmont of Mt. Lishan, the characteristics and locations of the active normal Lishan fault in west of Huaqing Pool provide important evidences for determining the seismotectonic environment, seismic stability evaluation of engineering in the eastern Weihe Basin. After reviewing the results from high-density resistivity method, seismic profile data, geological drillhole section and trenching in west of the Huaqing Pool, it is found that the strike of western normal Lishan Fault changes from EW direction at the eastern part to the direction of N60°W, and the fault consists of two branches, dipping NE with a high dip angle of~75°. The artificial shallow seismic profile data reveals that the attitude of strata near Lishan Fault mainly dips to south, which is presumed to be related to the southward tilt movement of Mt. Lishan since the Cenozoic. The section of geological drillhole reveals that since the late middle Pleistocene, the displacement of the paleo-soil layer S₂ is about 10m. And the maximum displacement of western Lishan Fault recorded in the paleo-soil layer S₁ reaches 7.8m since the late Pleistocene. In addition, evidences from trench profile show that the western Lishan Fault was active at least 3 times since Malan loess deposition with ¹⁴ C dating age(32 170±530)Cal a BP. The multiple activities of the Lishan Fault result in a total displacement about 3.0m in the Malan loess layer L₁. The latest activity of the western Lishan Fault produced a displacement of about 0.9m in the early Holocene loess layer L₀((8 630±20)Cal a BP)and caused obvious tensile cracks in the Holocene dark leoss layer S₀((4 390±20)Cal a BP). Briefly, we have obtained a vertical movement rate of about 0.11~0.19mm/a since the Holocene((8 630±20)Cal a BP)in the western extension of the Lishan Fault, the recurrence interval of earthquakes on the fault is about(10.7±0.5)ka, and the co-seismic surface rupture in a single event is inferred to be about 0.9m.  相似文献   

STUDY ON FOCAL DEPTH OF THE M_S5.4 CANGWU EARTHQUAKE IN GUANGXI          下载免费PDF全文

ZHAO Tao  CHU Ri-sheng  NI Si-dao  WANG Ying  ZHOU Yong  ZENG Xiang-fang 《地震地质》2019,41(3):619-632

On July 31th, 2016, a magnitude 5.4 earthquake struck Cangwu Country, Guangxi Zhuang Autonomous Region, it was the largest earthquake recorded by Guangxi Seismological Network since it set up. The number of people affected by the earthquake had reached 20 000, and the direct economic losses caused by the earthquake were nearly 100 million Yuan. After the earthquake, USGS provided a global earthquake catalog showing that the focal depth of Cangwu earthquake was about 24.5km. However, the result given by the Global Centroid Moment Tensor showed the focal depth of this earthquake was 15.6km. However, the result obtained by Xu Xiaofeng et al. using CAP method was 5.1km. It was clear that the focal depths of Cangwu earthquake given by different institutions were quite different from each other. However, accurate focal depth of the earthquake has important significance for exploring the tectonic mechanism near the epicenter, so it is necessary to further determine the more accurate depth of the Cangwu earthquake. In order to further accurately determine the focal depth of Cangwu earthquake, we used the global search method for travel-time residual to calculate the focal depth of this earthquake and its error range, based on the regional velocity model, which is a one-dimensional velocity model of the Xianggui tectonic belt produced by the comprehensive geophysical profile. Then, we inverted the focal mechanism of this earthquake with the CAP method. Based on this, the focal depth of Cangwu M_S5.4 earthquake was further determined by the method of the Rayleigh surface wave amplitude spectrum and the sPL phase, respectively. Computed results reveal that the focal depth of this earthquake and its error range from the travel-time residual global search method is about(13±3)km, the focal depth inverted by CAP method is about 10km, the focal depth from sPL phase is about 10km, and the focal depth from Rayleigh surface wave amplitude spectrum is about 9~10km. Finally, we confirmed that the focal depth of Cangwu M_S5.4 earthquake is about 10km, which indicates that this earthquake still occurred in the upper crust. In the case of low network density, the sPL phase and Rayleigh wave amplitude spectrum recorded by only 1 or 2 broadband stations could be used to obtain more accurate focal depth. The focal depth's accuracy of Cangwu M_S5.4 earthquake in the USGS global earthquake catalog has yet to be improved. In the future, we should consider the error of the source parameters when using the USGS global earthquake catalog for other related research.  相似文献   

VARIATION OF THE TRAVEL TIME DIFFERENCE BETWEEN TELESEISMIC PS CONVERTED WAVE AND PP TRANSMITTED WAVE IN FOCAL REGION BEFORE AND AFTER WENCHUAN M_S8.0 EARTHQUAKE          下载免费PDF全文

SONG Chun-yan  SHAO Xue-zhong  MA Jin 《地震地质》2019,41(3):726-742

When P waves from distant earthquakes meet a velocity discontinuity in the earth's crust and upper mantle, they give rise to a series of converted PS waves besides PP refracted waves. It is possible to monitor the variation of the physical properties of the medium in the limited formation space above the transition zone of the seismogenic zone by measuring the time difference between the teleseismic PS converted wave and the first arrival P wave, that is, time-variation Δt_PS=t_PS-t_P. The advantage of this method is that the transition point of the teleseismic source with similar source is relatively stable at the transition interface, and the accuracy of the measured relative time is high, and the change of the medium in a small range of the seismogenic zone above the conversion interface can be monitored. This paper studies the variation of the travel time difference Δt_PS in focal region before and after Wenchuan M_S8.0 earthquake. We select 2001 to 2012 as the research period, use teleseismic waveforms which occurred in the southern region of Sumatra and Hindu Kush area recorded by Sichuan station YZP and JJS. These teleseisms satisfy 5.0 ≤ M ≤ 6.5, and their waveform signal-to-noise ratio is high with clear initial P-wave motion. The epicentral distance of teleseisms is less than 3 degrees. Then we obtain the variation of the travel time difference Δt_PS between teleseismic PS converted wave and PP transmitted wave recorded during the study period in the two stations. The results show that there is a slow increasing trend of Δt_PS before 2006, and an obvious low value process of Δt_PS appeared in the period about 2 years before the Wenchuan earthquake. The maximum decline was about 0.2~0.3s, more than 4~5 times the measurement error. The low value has a certain degree of return about 2~3 months before the earthquake. The change of arrival time difference indicates that the medium is in different states in different periods of seismogenic process. The sharp decrease in Δt_PS from 2006 to January 2008 may be due to the strong disturbance caused by the stress accumulation of the medium. At this stage, the velocity of P wave and S wave increases with the increase of stress, and the increase of S wave velocity will result in the decrease of Δt_PS. The change of Δt_PS is greatly affected by S wave velocity, so Δt_PS appears to decrease rapidly. Regarding the low value that has a certain degree of return about 2~3 months before the Wenchuan earthquake, the possible reason is that the release of stress is much higher than the accumulation of stress in meta-instability stage. At this stage, the velocity of S wave decreases and the decrease of S wave causes Δt_PS to increase. Then, the Wenchuan earthquake of magnitude 8.0 occurred. It is shown that the teleseismic converted wave method in this paper can monitor the variation of medium's wave velocity before large earthquakes, and it has a good prospect in seismic monitoring and worth further experimental study.  相似文献   

CHARACTERISTICS OF SATELLITE GRAVITY FIELD AND SEISMOGENIC MECHANISM IN THE LONGMENSHAN FAULT ZONE          下载免费PDF全文

TANG Jing-tian  YANG Lei  REN Zheng-yong  HU Shuang-gui  XU Zhi-min 《地震地质》2019,41(5):1136-1154

Longmenshan fault zone is a famous orogenic belt and seismic zone in the southeastern Tibetan plateau of China. The Wenchuan M_S8.0 earthquake on May 12, 2008 and the Ya'an M_S7.0 earthquake on April 20, 2013 occurred in the central-southern part of Longmenshan fault zone. Because of its complex geological structures, frequent earthquakes and special geographical locations, it has attracted the attention of many scholars around the world. Satellite gravity field has advantages in studying gravity field and gravity anomaly changes before and after earthquake. It covers wide range, can be updated regularly, without difficulty in terms of geographical restrictions, and is not affected by environmental factors such as weather, terrain and traffic. Therefore, the use of high-precision Earth satellite gravity field data inversion and interpretation of seismic phenomena has become a hot topic in earth science research. In order to understand satellite gravity field characteristics of the Longmenshan earthquake zone in the southeastern Tibetan plateau and its seismogenic mechanism of earthquake disasters, the satellite gravity data was used to present the terrain information of the study area. Then, by solving the regional gravity anomaly of the Moho surface, the crustal thickness of the study area was inverted, and the GPS velocity field data was used to detect the crustal deformation rate and direction of the study area. Combining the tectonic setting of the Longmenshan fault zone and the existing deep seismic sounding results of the previous researchers, the dynamic characteristics of the gravity time-varying field after the earthquake in the Longmenshan earthquake zone was analyzed and the mechanism of the earthquake was explored. The results show that the eastward flow of deep materials in the eastern Tibetan plateau is strongly blocked at the Longmenshan fault zone. The continuous collision and extrusion process result in a "deep drop zone" in the Moho surface, and the long-term stress effect is conducive to the formation of thrust-nappe and strike-slip structures. The Longmenshan earthquake zone was in the large-scale gradient zone of gravity change before the earthquake, the deep plastic fluid material transport velocity differed greatly, the fluid pressure was enhanced, and the rock mechanical strength in the seismic source region was weakened, which contributed to the intrusion of crustal fluid and the upwelling of the asthenosphere. As a result, the continuous accumulation of material and energy eventually led to continuous stress imbalance in the deep part and shear rupture of the deep weak structure, causing the occurrence of the thrust-nappe and strike-slip earthquake.  相似文献   

PALEO-EARTHQUAKE STUDY METHODS ON BEDROCK FAULT SURFACE—HISTORY,CURRENT SITUATION,SUGGESTIONS AND PROSPECTS          下载免费PDF全文

ZOU Jun-jie  HE Hong-lin  YOKOYAMA Yosuke  WEI Zhan-yu  SHI Feng  HAO Hai-jian  ZHUANG Qi-tian  SUN Wen  ZHOU Chao  SHIRAHAMA Yoshiki 《地震地质》2019,41(6):1539-1562

  相似文献   

Polynomial chaos expansion and response surface method for nonlinear modelling of reference evapotranspiration     

Behrooz Keshtegar  Ozgur Kisi  Mohammad Zounemat-Kermani 《水文科学杂志》2019,64(6):720-730

The feasibility of polynomial chaos expansion (PCE) and response surface method (RSM) models is investigated for modelling reference evapotranspiration (ET₀). The modelling results of the proposed models are validated against the M5 model tree and multi-layer perceptron neural network (MLPNN) methods. Two meteorological stations, Isparta and Antalya, in the Mediterranean region of Turkey, are inspected. Various input combinations of daily air temperature, solar radiation, wind speed and relative humidity are constructed as input attributes for the ET₀. Generally, the modelling accuracy is increased by increasing the number of inputs. Including wind speed in the model inputs considerably increases their accuracy in modelling ET₀. Mean absolute error (MAE), root mean square error (RMSE), agreement index (d) and Nash-Sutcliffe efficiency (NSE) are used as comparison criteria. The PCE is the most accurate model in estimating daily ET₀, giving the lowest MAE (0.036 and 0.037 mm) and RMSE (0.047 and 0.050 mm) and the highest d (0.9998 and 0.9999) and NSE (0.9992 and 0.9996) with the four-input PCE models for Isparta and Antalya, respectively.  相似文献   

Non-normality increases variance of gravity waves trapped in a tilted box     

U. Harlander  I. D. Borcia  A. Krebs 《地球物理与天体物理流体动力学》2019,113(5-6):602-622

  相似文献   

Spectral analysis of continuous redox data reveals geochemical dynamics near the stream–aquifer interface     

Corey D. Wallace  Audrey H. Sawyer  Rebecca T. Barnes 《水文研究》2019,33(3):405-413

Changes in streamflow and water table elevation influence oxidation–reduction (redox) conditions near river–aquifer interfaces, with potentially important consequences for solute fluxes and biogeochemical reaction rates. Although continuous measurements of groundwater chemistry can be arduous, in situ sensors reveal chemistry dynamics across a wide range of timescales. We monitored redox potential in an aquifer adjacent to a tidal river and used spectral and wavelet analyses to link redox responses to hydrologic perturbations within the bed and banks. Storms perturb redox potential within both the bed and banks over timescales of days to weeks. Tides drive semidiurnal oscillations in redox potential within the streambed that are absent in the banks. Wavelet analysis shows that tidal redox oscillations in the bed are greatest during late summer (wavelet magnitude of 5.62 mV) when river stage fluctuations are on the order of 70 cm and microbial activity is relatively high. Tidal redox oscillations diminish during the winter (wavelet magnitude of 2.73 mV) when river stage fluctuations are smaller (on the order of 50 cm) and microbial activity is presumably low. Although traditional geochemical observations are often limited to summer baseflow conditions, in situ redox sensing provides continuous, high‐resolution chemical characterization of the subsurface, revealing transport and reaction processes across spatial and temporal scales in aquifers.  相似文献   

Quantitative estimation of submarine groundwater discharge using airborne thermal infrared data acquired at two different tidal heights     

Ki‐mook Kang  Duk‐jin Kim  Yunjee Kim  Eunhee Lee  Bong‐Gwan Kim  Seung Hee Kim  Kyoochul Ha  Dong‐Chan Koh  Yang‐Ki Cho  Guebuem Kim 《水文研究》2019,33(7):1089-1100

Submarine groundwater discharge (SGD) plays an important role in coastal biogeochemical processes and hydrological cycles, particularly off volcanic islands in oligotrophic oceans. However, the spatial and temporal variations of SGD are still poorly understood owing to difficulty in taking rapid SGD measurements over a large scale. In this study, we used four airborne thermal infrared surveys (twice each during high and low tides) to quantify the spatiotemporal variations of SGD over the entire coast of Jeju Island, Korea. On the basis of an analytical model, we found a linear positive correlation between the thermal anomaly and squares of the groundwater discharge velocity and a negative exponential correlation between the anomaly and water depth (including tide height and bathymetry). We then derived a new equation for quantitatively estimating the SGD flow rates from thermal anomalies acquired at two different tide heights. The proposed method was validated with the measured SGD flow rates using a current meter at Gongcheonpo Beach. We believe that the method can be effectively applied for rapid estimation of SGD over coastal areas, where fresh groundwater discharge is significant, using airborne thermal infrared surveys.  相似文献